Class 6 Science Chapter 9 Electricity and Circuits.
THIS PAGE INCLUDES :
- CHAPTER OVERVIEW -
These Topics are covered in NCERT Class 6 Science Chapter 9 Electricity and Circuits.
# Electric Cell
# Electric Bulb
# Electric Circuit
# Electric Switch
# Electric Conductors
# Electric Insulators
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# NCERT Solutions :
Class 6 Science Chapter 9 NCERT Solutions are completely based on NCERT Book for Class 6 Science Chapter 9 Electricity and Circuits. These NCERT Solutions for Class 6 Science Chapter 9 Electricity and Circuits contains Answers and detailed explanation of Questions talked about in NCERT Class 6 Science Chapter 9 Electricity and Circuits. Here we suggest you to go through these Class 6th Science Chapter 9 NCERT Solutions thoroughly to strengthen you understanding about this Chapter of Class 6 Science.NCERT Solutions for Class 6 Science Chapter 9 - Q1.
Q1. Fill in the blanks :
(a) A device that is used to break an electric circuit is called Switch .
(b) An electric cell has two terminals.
NCERT Solutions for Class 6 Science Chapter 9 - Q2.
Q2. Mark 'True' or 'False' for following statements:
(a) Electric current can flow through metals.
Ans. True
(b) Instead of metal wires, a jute string can be used to make a circuit.
Ans. False
(c) Electric current can pass through a sheet of thermocol.
Ans. False
NCERT Solutions for Class 6 Science Chapter 9 - Q3.
Q3. Explain why the bulb would not glow in the arrangement shown in Figure given below.
Ans. Bulb will not glow in the arrangement because circuit is not complete due to presence of insulator in the centre. The holder of the tester used in the connection is made of plastic which is an insulator. Thus, current will not flow in the circuit.
NCERT Solutions for Class 6 Science Chapter 9 - Q4.
Q4. Complete the drawing shown in the given figure to indicate where the free ends of the two wires should be joined to make the bulb glow.
Answer.
NCERT Solutions for Class 6 Science Chapter 9 - Q5.
Q5. What is the purpose of using an electric switch? Name some electrical gadgets that have switches built into them.
Ans. Switch is a simple device that is used to either break the electric circuit or to complete it. So, the purpose of an electric switch is to complete or break the circuit. Electric gadgets that have switches built into them are microwaves, refrigerator, electric cooker, electric iron, etc.
NCERT Solutions for Class 6 Science Chapter 9 - Q6.
Q6. Would the bulb glow after completing the circuit shown in Figure given below. If instead of safety pin we use an eraser?
Ans. No, because eraser is an insulator.
NCERT Solutions for Class 6 Science Chapter 9 - Q7.
Q7. Would the bulb glow in the circuit shown in Figure given below?
Ans. No, the bulb will not glow because the wires from both terminals of the battery are connected to the one terminal of the bulb. In order to make the bulb glow, wires should be connected to the both terminals of the bulb.
NCERT Solutions for Class 6 Science Chapter 9 - Q8.
Q8. Using the "conduction tester" on an object it was found that the bulb begins to glow. Is that object a conductor or an insulator? Explain.
Ans. That object is conductor because electricity can pass thorough only a conductor and not through an insulator. Unless the object is conductor, the bulb could not glow.
NCERT Solutions for Class 6 Science Chapter 9 - Q9.
Q9. Why should an electrician use rubber gloves while repairing an electric switch at your home? Explain.
Ans. The rubber gloves are insulators. It saves the electrician form getting an electric shock. That is why an electrician should use rubber gloves, while repairing an electric switch.
NCERT Solutions for Class 6 Science Chapter 9 - Q10.
Q10. The handles of the tools like screwdrivers and pliers used by electricians for repair work usually have plastic or rubber covers on them. Can you explain why?
Ans. Plastic and rubber, both is bad conductor of electricity (insulator). Hence plastic handles protect the electrician from electric shocks.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# Chapter Notes :
Class 6 Science Chapter 9 Electricity and Circuits Notes pdf which includes Class 6 Science Chapter 9 Electricity and Circuits Notes. These Class 6 Science Chapter 9 Notes pdf are completely based on NCERT Book for Class 6 Science Chapter 9 Electricity and Circuits. These notes contains detailed explanation of 6th class science Chapter 9 Electricity and Circuits. I suggest you to go through these Notes to strengthen you understanding about this Chapter of Class 6 Electricity and Circuits.Class 6 Science Chapter 9 notes.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# Extra Questions :
Class 6 Science Chapter 9 Extra Questions are completely based on NCERT Book for Class 6 Science Chapter 9 Electricity and Circuits. These Extra Questions contains detailed explanation or Definition of some Terms talked about in NCERT Class 6 Science Chapter 9 Electricity and Circuits. You also get some short questions and long questions regarding Chapter 9 Electricity and Circuits of class 6 Science and Some Value Based Questions regarding NCERT Class 6 Science Chapter 9 Electricity and Circuits. Here we suggest you to go through these Class 6th Science Chapter 9 Extra Questions to strengthen you understanding about this Chapter of Class 6 Science.
# Class 6 Science Chapter 9 - Definitions :
Q. What is a cell?
Ans. It is a device that produces electricity.
Q. What is electricity?
Ans. The flow of an electric current constitutes electricity.
Q. Define an electric cell and a battery.
Ans. A cell is an electric device that produces electricity. When two or more cells are joined together, it is called a battery.
Q. Define a conductor.
Ans. The substance which allows an electric current to pass through it, is called a conductor, e.g., metals like gold, silver, etc.
Q. What is an insulator?
Ans. The substance which does not allow current to pass through it, is called an insulator, e.g., rubber, paper, plastic, etc.
Q. What do you mean by an electric circuit?
Ans. The closed path along which the electric current flows from one terminal to another is called as an electric circuit.
Q. What is dry cell?
Ans. It is a device which converts chemical energy into electrical energy.
Q. What is solar cell?
Ans. A device which converts solar energy into electrical energy.
Q. Define Filament
Ans. Filament is a thin wire that is present in an Electric Bulb. It emits light when electric current passed through it.
Class 6 Science Chapter 9 Extra Questions.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# Class 6 Science Chapter 9 - Very Short Answer Questions :
Q. Name a good conductor of electricity which is not a metal.
Ans. Air
Q. Thin wire inside the bulb that gives off light is called?
Ans. Filament .
Q. The flow of electricity is called?
Ans. Current
Q. The devise that is used to open or close the electric circuit is called?
Ans. Switch
Q. The bulb with broken filament is called?
Ans. Fused
Q. The electric cell converts energy into energy.
Ans. Chemical - Electrical.
Q. The closed path through which current flows is called?
Ans. Electric Circuit.
Q. Materials that allow electricity to pass through them are -
Ans. Electrical Conductors.
Q. A device that converts the chemical energy to electrical energy is called?
Ans. Cell
Q. In a circuit, the electric current flows from the terminal to the terminal.
Ans. Positive - Negative.
Q. How many terminals are there in a cell?
Ans. There are two terminals in a cell.
Q. What is the direction of flow of current in a dry cell?
Ans. The current flows in closed circuit from +ve to -ve terminal of cell.
Q. Name the +ve terminal of dry cell.
Ans. Carbon rod with a metal cap on it.
Q. Name the -ve terminal of a dry cell.
Ans. Zinc metal plate.
Q. Name some devices in which electric cells are used.
Ans. TV remote, torches, wrist watches, wall clocks, remote controlled toys, etc.
Q. What kind of cells are used in TV remotes?
Ans. Pencil cells
Q. What kind of cells are used in Wrist watch and Calculator?
Ans. Button cells
Q. Name the material that glows inside the bulb.
Ans. Filament
Q. Why is tungsten used as a filament?
Ans. Tungsten has high melting point and high resistance hence it is used as filament.
Q. Why do bulbs have two terminals?
Ans. Bulb has two terminals to connect the filament with the circuit so that the current can pass through it and make the circuit complete.
Q. Why a fused bulb does not glow?
Ans. A fused bulb does not glow because in a fused bulb the filament is broken and the circuit is incomplete.
Q. Paheli wanted to glow a torch bulb using a cell. She could not get connecting wires, instead, she got two strips of aluminium foil. Will she succeed? Explain, how?
Ans. Yes, Because Aluminium foils is a good conductor of electricity. So, it can act as connecting wires.
Q. Will the bulb shown in the given circuit glow? Give reasons for your answer.
Ans. The bulb will not glow as only one terminal of both the bulb and cells are connected.
Q. Boojho has a cell and a single piece of connecting wire. Without cutting the wire in two, will he be able to make the bulb glow? Explain with the help of a circuit diagram.
Ans. Yes, using the arrangement given below he can succeed in getting the bulb glow.
Q. What is open circuit?
Ans. An electric circuit in which electrical contact at any point is broken is called open circuit.
Q. Copper and aluminium metals are used for making wires.
Ans. Copper and aluminium are very good conductors of electricity hence, they are used to make wires.
Q. Write one use of insulators.
Ans. Insulators are used in making switchboard, handles of testers, screw drivers.
Q. Why an electrician uses rubber gloves while repairing an electric switch.
Ans. Wearing rubber gloves will prevent electric shock (rubber being an insulator)
Q. Why the Electric wires at home are covered with plastic.
Ans. Plastic being an insulator prevents electric shock, hence for safety, the electric wires are covered with plastic.
Q. What is the main function of a switch?
Ans. It is used to regulate the flow of current in a circuit.
Q. Name some metals which are conductors.
Ans. Silver, copper, aluminium, etc.
Q. Name some conductors which are not metals.
Ans. Moist air, salt solution, impure water, graphite, etc.
Q. Name some insulators of electricity.
Ans. Mica, ebonite, glass, wood, dry air, etc.
Q. Which type of material is used in electric appliance as protective measures?
Ans. Insulator
Q. What is an open circuit?
Ans. When there is a gap between two terminal, the circuit is called an open circuit.
Q. Can rubber or jute be used instead of metal wire to connect circuit?
Ans. No, we cannot use rubber or jute to connect circuit wires.
Q. How is electricity produced by an electric cell?
Ans. An electric cell produces electricity from chemicals stored in it.
Q. Name two metal used to connect wires.
Ans. Copper and aluminium.
Q. When does a bulb glow?
Ans. A bulb glows only when the circuit is complete.
Q. Why is tungsten used as a filament?
Ans. Tungsten has high melting point and high resistance, hence it is used as filament.
Q. Why are electric wire, covered with rubber and plastic?
Ans. To prevent electric shocks as they are insulators.
Q. In which of the following circuits A, B and C given below, the cell will be used up very rapidly?
Ans. In circuit C the cell will be used up very rapidly because two bulbs are connected to a single cell.
Q. How are cells arranged in a torch—in parallel or in series?
Ans. In torch, cells are connected in series.
Class 6 Science Chapter 9 Extra Questions.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# Class 6 Science Chapter 9 - Short Answer Questions :
Q. What is an electric cell and a battery.
Ans. A cell is an electric device that produces electricity. When two or more cells are joined together, it is called a battery.
Q. How air is a conductor or an insulator? Explain.
Ans. If air is dry then it is an insulator or bad conductor of electricity as it doesn’t conduct electricity when the circuit is open. If air is moist then it acts as conductor.
Q. Why does a cell stop producing electricity after sometime?
Ans. After sometime, all the chemicals in an electric cell are used up. Thus, no chemical reaction takes place to produce electrical energy.
Q. When the chemicals in the electric cell are used up, the electric cell stops producing electricity. The electric cell is then replaced with a new one. In case of rechargeable batteries (such as the type used in mobile phones, camera and inverters), they are used again and again. How?
Ans. Rechargeable batteries can be recharged by providing them appropriate current.
Q. Write the uses of switch.
Ans. The function of switch in an electric circuit is to either make or break the electric circuit. A switch is used to turn current to an electrical appliance either on or off.
Q. Why does the electric current pass through the metals?
Ans. Metals are good conductors of electricity. They allow an electric current to flow through them easily. Hence, an electric current can flow through metals.
Q. Two cells can be joined in two ways in series and in parallel. What do you mean by these two ways? In which way the cells are joined in a torch?
Ans.
(a) In series: When (+) terminal of one cell is joined to (-) terminal of the other, the arrangement is called in series.
(b) Parallel: When (+) terminal of a cell is joined to (+) terminal and (-) terminal to (-) terminal of other cell, the arrangement is called parallel.
Q. What is bulb? Mention two main conditions necessary to make the bulb glow.
Ans. A bulb is an electric device which gives us light when a suitable material inside it called filament gets heated up to a high temperature. It runs on electricity i.e, when an electric current passes through it, it glows. Two main conditions necessary to make the bulb light up are: (i) Connect the positive (+ve) terminal of the left cell with the negative (-ve) one of the right side cell using a wire. (ii) Close the switch to complete the circuit.
Q. The bulb whose filament is broken does not glow after connecting it with an electric cell.
Ans. The circuit is incomplete, if the filament of the bulb is broken. Hence, it does not glow even after connecting it with electric cell.
Q. Why does one remove the plastic coating of connecting wires before making circuits?
Ans. Plastics is an insulator. It prevents electric current to pass through it. To complete the circuit, we have to remove the plastic coating to connect wires so that the current can flow through the circuit and make the circuit complete.
Q. What is power station? What are its types?
Ans. The electricity used by us in our homes is supplied from power stations. Types of power station:
(a) Hydro power station
(b) Thermal power station
(c) Solar power station
(d) Nuclear power station.
Q. Why is tungsten used as a filament?
Ans. Tungsten has high melting point and high resistance, hence it is used as filament.
Q. Why we are advised not to touch electric appliances and switches with wet hands?
Ans. Water is a good conductor of electricity and if our hands are wet it can pass to us quickly giving us an electric shock
Q. Why does a cell stop producing electricity after sometime?
Ans. After sometime, all the chemicals in an electric cell is used up. Thus, no chemical reaction takes place to produce electrical energy.
Q. What is an electric cell?
Ans. Electric cell is a source of energy. It produces a small amount of electricity from chemicals stored inside it.
Q. What is meant by a battery?
Ans. When two or more cells are joined together, it is called a battery.
Q. Give any difference between a cell and a battery.
Ans. A cell has only one plate as a positive and only one plate as a negative electrode, while a battery, which is a combination of cells in a series, can have many plates.
Q. Why does a cell stop producing electricity after some time?
Ans. An electric cell produces electricity from chemicals stored inside it. When the chemicals inside the cell are used up, the cell stops producing electricity.
Q. Why should we not join the wires connected to the two terminals of the electric cell?
Ans. We should never join the wires with two terminals of the electric cell. If we do so, the chemicals in the electric cell get used up very fast and the cell stops working.
Q. What are the advantages of dry cells?
Ans. Advantages of dry cells are :
(a) They are light in weight and small in size.
(b) They can be transported from one place to another easily.
(c) There is no fear of leakage/spillage in dry cells.
Q. What is electric circuit?
Ans. Path from one terminal of the electric cell to the other terminal of the electric cell through wires passing to and from the electric bulb is called electric circuit.
Q. What is the direction of the current in the electric circuit?
Ans. In an electric circuit, the direction of current is taken to be from the positive terminal to the negative terminal of the electric cell.
Q. Why does a fused bulb not light up?
Ans. A fused bulb means a break in its filament which results in a break in the path of the current between the terminals of the electric cell. Thus a fused bulb does not light up as no current passes through its filament.
Q. You have a single piece of connecting wire. Can you make a bulb glow without cutting the wire into two? Explain with the help of a circuit diagram.
Ans. Yes, we can glow the bulb by joining one end of the wire to the negative terminal of battery and other to the metal cap of the bulb. Then by placing the bulb on the positive terminal of the cell will make the bulb glow.
Q. A torch is not functioning, though contact points in the torch are in working condition. What can be the possible reasons for this? Mention any three.
Ans. The possible reason could be
(a) the bulb may be fused.
(b) the cells may have been used up.
(c) the cells are not placed in the correct order.
(d) the switch is faulty.
Q. A torch is not functioning, though contact points in the torch are in working condition. What can be the possible reasons for this? Mention any three.
Ans.
a. The filament may be broken (fused bulb)
b. Switch may be off.
c. Cell/ battery may be weak or used up.
Q. Why all the light bulbs and fans go off if the main switch is turned off in your house?
Ans. It happens so because when the main switch is off, the overall household circuit is broken (made incomplete), that is why, all the light bulbs and fans go off.
Q. A torch requires 3 cells. With the help a diagram show the arrangement of the cells inside the torch to make it glow.
Ans. Refer to the diagram given in the content book. (to be drawn using 3 cells)
Q. What types of cells are used in calculators? What are the main advantages of using such type of cells?
Ans. Calculators use solar cells which take sun’s energy and convert it into electricity. The
advantage of using solar cells is that they are efficient and durable
Q. Mention any three precautions that are advised while handling electrical devices.
Ans. Precautions that should be taken during the use of electricity are as follows:
a. Always use insulated tools while working.
b. Never use equipment with frayed cords, damaged insulation or broken plugs.
c. Avoid water at all times when working with electricity. Never touch or try repairing any electrical equipment or circuits with wet hands. It increases the conductivity of electric current.
Q. What are the main advantages of a secondary cell over a primary cell?
Ans. Secondary cell last long and can be used over again and again. A secondary cell is rechargeable meaning that the chemical reactions taking place in the cell are reversible and can be carried out in the opposite direction to charge the cell again.
Q. Why are all the electric switches made of plastic covering?
Ans. Plastics are poor conductor of electricity and resistant to heat, so they do not allow the electric current to pass through them making them safe to handle. So they are used to make electric switches and plugs.
Q. Give the symbol of following : Cell, Battery, Lamp / bulb, Switch.
Ans.
Q. Mention two advantages of a dry cell.
Ans.
1. It converts chemical energy into electrical energy.
2. It is light and small in size.
Q. Identify conductors and insulators from the following: Eraser, paper, matchstick, copper wire, pencil lead, polythene
Ans.
Conductors : Copper wire, pencil lead.
Insulator : Eraser, paper, matchstick, polythene.
Q. Name the scientist who invented electric cell and the scientist who invented electric bulb.
Ans.
Electric cell : Alessandro Volta.
Electric bulb : Thomas Alva Edison.
Q. Give one activity to prove that air is an insulator.
Ans. Take an electric circuit, keep the terminals unconnected in the air. The bulb do not glow, as air is an insulator and does not allow the current to flow through it.
Q. In any electric circuit, when the switch is on and the current flows through it why do the wire, switches, bulb or devices become hot?
Ans. This is because electric energy changes into heat energy.
Q. The headlights of a car have reflectors behind the bulb. What is the function of reflectors?
Ans. The reflector helps in reflecting the light into a focused area.
Q. If you touch an electric wire carrying current you get a shock, but if on the same wire the birds sit they do not get any shock/current. Explain why?
Ans. When we hold the wire carrying current then the circuit is closed and the current flows from our body and enters earth but the birds sitting on the same wire do not get any current as the circuit is not complete. If the bird touches the earth wire, it will also die due to electric shock.
Class 6 Science Chapter 9 Extra Questions.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# Class 6 Science Chapter 9 - Long Answer Questions :
Q. What is a circuit? Name its different components and draw a labelled diagram of a circuit.
Ans. A circuit is a path along which electric current flows. It is made up of various electrical components :
1. There is a cell or a battery in the circuit that is used as a source of electric current.
2. There is an electric switch that is used to regulate the flow of current. It is also called ‘key’. When the switch is ‘on’, the current flows in the circuit and when it is ‘off, the current does not flow.
3. A bulb is connected to the circuit to confirm the flow of current. When it lights up, the circuit is said to be complete, i.e., current is flowing.
4. On the other hand, when the bulb does not glow, the circuit is said to be incomplete, i.e., current is not flowing.
5. The most important component of the circuit is the connecting wire which connect all the components of the circuit to make the current flow.
Q. Describe a closed and open circuit with the help of diagrams.
Ans. A circuit which is complete in all respect, i.e., its all connections are intact, is called a closed circuit. When the switch is on, the current flows in it and the bulb glows (Fig.a). On the other hand, a circuit is called open or not complete (Fig.b), when connections are not intact, i.e., broken. In an open circuit, when the switch is on, the bulb does not glow. It means that current is not flowing in the circuit. This is due to broken wires or all components in the circuit are not connected properly.
Q. Describe an electric cell with the help of a well-labelled diagram.
Ans. Electric cell is a device which converts chemical energy into electrical energy. Electricity to the bulb in a torch is provided by the electric cell. it has a small metal cap on one side and a metal disc on the other side. The metal cap is the positive terminal of the electric cell. The metal disc is the negative terminal. All electric cells have two terminals; a positive terminal and a negative terminal.
An electric cell produces electricity from the chemicals stored inside it. When the chemicals in the electric cell are used up, the electric cell stops.
Q. What is torch? Give its various parts and explain its working. Also give its labelled diagram.
Ans. A torch is an electric device that runs on electricity. It is actually a compact electric circuit. Its various parts are - a metallic or plastic casing, bulb, reflector, slide, switch, metal switch contact. Electric current flows in a closed circuit only. In a torch, the cells are connected to a small bulb through a slide switch. When this slide switch is slides forward, cell contact is complete with the bulb. The electric circuit is closed or complete. The electric current starts flowing from the terminal of the cell and returns to the other terminal. Thus, the bulb starts glowing and gives light. On the other hand, on switching off, the contact between the metal strips is broken and the current stops flowing. Thus, the bulb stops glowing.
Q. Mention different safety measures and precautions while using electricity and electrical appliances.
Ans. Electricity is very useful to us. It has made our life comfortable, easy and luxurious. On the other hand, it is dangerous also. So, we must adopt some safety measures and take precautions discussed below :
1. Never touch electrical switches or gadgets when your body is wet.
2. If you need to operate or repair any electrical appliances, wear rubber hand gloves and stand on a dry wooden or plastic base.
3. Never play with electric sockets or wires.
4. In case of short circuit or a spark in a switch, put the main switch off immediately with the help of a plastic or wooden stick.
5. In case of fire in electric wires, never use water to extinguish it. First switch off the mains, then use dry sand to extinguish the fire.
Class 6 Science Chapter 9 Extra Questions.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
# Class 6 Science Chapter 9 - Value Based Questions :
Q. When Sheena’s classmates leave for games, library, yoga, etc., classes, Sheena always remembers to switch off the lights and fans of her class. For this practice she was honored by the president of eco-club.
(a) What is electricity?
Ans. Electricity is a form of energy used to power machines and electrical appliances.
(b) What are the sources of electricity in your home?
Ans. We get electricity in our home through cell, power house and solar cells.
(c) What values of Sheena is shown here?
Ans. Sheena is an eco-friendly, responsible and intelligent girl.
Q. After taking a bath Rahman went to his room. As soon as he raised his hand to switch on the light, his mother shouted out loudly. He was very astonished, with the strange behaviour of his mother. His mother came to him and explained him the reason “why he shouldn’t be touching the electrical items with wet hands”. Rahman made up his mind to spread this awareness in the school. So he decided to give a small speech on this topic during the school assembly.
(a) What are electrical appliances?
Ans. Devices that run on electricity are called electrical appliances.
(b) What would have happened if Rahman touched the switch with his wet hand?
Ans. He might have got shock.
(c) What value of Rahman is shown here?
Ans. Rahman is a responsible, sensible, caring and confident boy.
Class 6 Science Chapter 9 Extra Questions.
Here at MSEducator.in you get Complete FREE Study Material for Class 6 Science Chapter 9 Electricity and Circuits.
Which includes :-
# Class 6 Science Chapter 9 Explanation.
# Class 6 Science Chapter 9 Important Questions.
Electricity and Circuits class 6 mcq
# MCQ Test :
Class 6 Science Chapter 9 MCQ Test is completely based on NCERT Book for Class 6 Science Chapter 9 Electricity and Circuits. This is a quiz based test, which is consist of 25 MCQ for class 6 science chapter 9 mcq. These questions will test your Understanding about the concepts that you have learned in class 6 science chapter 9 Electricity and Circuits.
![www.MSEducator.in [MCQ Test] Class 6 Science Chapter 9 Electricity and Circuits.](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgB6oEKCE0leYYlUprKAEupWTxKClWJyXZAgZnfXHlXcemcBF57e114TKxTSgW6hGD-1GdkczmvSGe2NjZB3aP-TjpcD6TiOHBV2QgO2g2U5yp2Zd14ciMgfSg4wByaX1Vd8HuDizobFUEKL6zcY7o3tSgkgdRIugJDEMWqPVOLKzcD2mwoonM_K9Rb/w429-h640/www.MSEducator.in-Class-6-Science-Chapter-9-Electricity-and-Circuits-MCQ-Test.webp "www.MSEducator.in [MCQ Test] Class 6 Science Chapter 9 Electricity and Circuits.")
We hope that the given study material for Class 6 Science Chapter 9 Electricity and Circuits will help you to understand the concepts with more clarity. But, If you still have any query regarding Class 6 Science Chapter 9 Electricity and Circuits then Feel Free to ask your doubts in the section given below.
# Still have some Doubts?
-- Feel FREE to Ask your Doubts here --
CLASS 6 LITERATURE
Tags : CBSE, Class 6, Science, CBSE Class 6 NCERT Solutions, CBSE Class 6 Science Solutions, CBSE Solutions, Free Class 6 Science Solutions, Free NCERT Solutions, NCERT Books Solution, NCERT CBSE Class 6 Science Solutions, NCERT CBSE Solutions, NCERT Class 6 Science Solutions, NCERT Solutions, NCERT Solutions For Class 6 Science Solutions, NCERT Solutions For Class 6 Science Chapter, class 6 science chapter 9, Electricity and Circuits class 6, class 6th science ch 9, class 6 chapter 9 science, ncert class 6 science chapter 9, class 6th science chapter 9, ncert solutions for class 6 science chapter 9, class 6 science chapter 9 question answer, class 6 science chapter 9 exercise, class 6 chapter 9 question answer, class 6th chapter 9 question answer, class 6 science chapter 9 question answer pdf, science class 6 chapter 9 question answer, class 6 science chapter 9 questions and answers, class 6th science chapter 9 question answer, class 6 science chapter 9 pdf, class 6 science chapter 9 notes, class 6 science notes pdf, Electricity and Circuits class 6 notes, 6th standard science notes pdf, class 6 science chapter 9 notes pdf, 6th science notes, 6th class science notes, class 6 notes science, class 6 science notes chapter 9, class 6 science chapter 9 extra questions, class 6 science ch 9 extra questions, Electricity and Circuits class 6 extra questions and answers, ncert class 6 science chapter 9 extra questions, extra questions for class 6 science chapter 9, class 6 science ch 9 mcq, class 6 science chapter 9 mcq, Electricity and Circuits class 6 mcq, mcq questions for class 6 science chapter 9, class 6 science chapter 9 mcq online test, Electricity and Circuits class 6 mcq online test, mcq on Electricity and Circuits class 6, ncert class 6 science chapter 9 mcq, science class 6 chapter 9 mcq, class 6 science chapter 9 test paper.